1 / 2HP Fan Blower Motor Condenser Blowers 115VAC 60Hz Permanent Split Capacitor

Direct Drive Blower Motor PSC 1/2HP air vents blower fans condenser blowers 115VAC 60Hz

Typical Application:

Blowers, Fans, Ventilation Facilities

Critical Feature:

Direct Drive Blower Motor, Motor Application HVAC/R, Motor Sub Application Direct Dr Fan/Blower, Motor Type PSC, Enclosure Open Air-Over, HP 1/2, Nameplate RPM 1075, Voltage 115, Full Load Amps 6.5, Hz 60, Phase 1, Frame 48Y, Service Factor 1.0, Max. Ambient Temp. 40 Degrees C, Insulation Class B, Duty Continuous Air Over, Number of Speeds 2, Mounting Ring/Stud/Band, Bearings Sleeve, Thermal Protection Auto, Rotation CW/CCW, Body Dia. 5-5/8", Length Less Shaft 5-7/8", Shaft Dia. 1/2", Shaft Length 4", Capacitor Included No, Capacitor Required 2MDV7, Resilient Ring Dia. 2-1/4", Ring to Ring Center 5-7/16", Stud Pattern 3-5/8 x 3-5/8", Stud Size #8-32 x 5/8", RPM Range 1001-1100, Standards UL Recognized, CSA Certified, Application Direct Drive Furnace Blowers, Unit Heaters, Air Conditioners, Many Other Shaft Mounted Fan and Blower Uses, Includes 2-1/4" Rings with 2-1/2" Adapters

Technical Data:

Application: HVAC, Direct Drive Propeller Fan

Motor Design: Permanent Split Capacitor

Motor Enclosure Design: Open Air-Over

HP: 1/4 and ½

Nominal no-load rpm: 1200

Voltage: 115

Hz: 60

Phase: 1

Duty: Continuous

No. of Speeds: 2

Motor Mounting: Stud

Certifications: UL Listed or Recognized, CSA Certified

Frame: 48 type or nearest equivalent

Motor Service Factor: 1.00 min.

Max. Ambient Temp: 40 Degrees C or higher

Ins. Class: B or F

Motor Mounting Position: All Angles

Motor Bearings: Sleeve or sealed bearing

Motor Thermal Protection: Auto reset

Motor Shaft Rotation: Bi-directional CW/CCW

Shaft Dia.: 1/2"

Shaft Length: 2" min.

Motor Shaft Design: Flat

Capacitor: To be included with motor

Nominal RPM Range 1000-1175

For custom made, please feel free to contact us today.